Skip to content

8 DIY Canine Bows You Can Make At present (With Footage)


    We didn’t assume canine may get any cuter, however we had been flawed. There’s one thing a couple of canine in a bow tie that melts your coronary heart.

    The good factor about bow ties is that they’re easy to create. When you’ve made just a few designs, you can also make any bow tie.

    On this publish, we’ve listed 8 DIY canine bows to attempt in your pup. The creators of those tasks added their private touches for an distinctive DIY final result. Most designs are straightforward, however we’ve thrown in some challenges for those who’re on the lookout for one.

    Divider 4

    The High 8 DIY Canine Bows

    1. No-Sew Canine Bow Tie Collar Slide

    Supplies: 4” x 7” piece of cloth, 4” x 1.25” material, skinny rubber band, .25” thick elastic ribbon, Felt (non-compulsory)
    Instruments: Scorching glue, sizzling glue gun, material tape, measuring tape or ruler
    Problem Stage: Straightforward

    This design is for these on the lookout for a fast, no-sew challenge. The result’s an lovable, eye-catching accent to your canine’s collar. You possibly can simply full this challenge in about 5 to 10 minutes with out spending a lot cash. Odds are, you have already got what you want.

    To get began, you want material, elastic ribbons, rubber bands, and a sizzling glue gun. You’re all set! When you’re completed, you may both slip the bow tie over the collar or place the bow tie in your canine’s fur. The bow tie is small, so it’s greatest for little canine or a longhaired canine.

    2. The Canine Story Canine Bow Tie (No Machine) by The Canine Story

    Supplies: Cloth, fusing, elastic
    Instruments: Thread and needle, scissors, iron
    Problem Stage: Straightforward

    That is one other straightforward DIY design that yields a medium-sized bow. This straightforward design requires material, elastic, fusing, needle, and thread. You don’t want a stitching machine, and the creator provides an elementary sample to comply with.

    This challenge would take half-hour to an hour to your first attempt because you’re working with a sample, needles, and thread. After that, you would do that in beneath 20 minutes. Don’t fear about following the sample if it’s your first time. It’s so easy, the challenge is virtually baby’s play.

    3. Elastic Canine Bow Tie by Creating Purple Pleasure

    Supplies: Cloth, elastic
    Instruments: Scissors, stitching machine, sample, iron (non-compulsory)
    Problem Stage: Straightforward

    Who desires to consistently fluff a canine’s bow tie? This design is a barely thicker bow tie to forestall it from mendacity flat in your canine’s neck. As a substitute of utilizing extra material, it seems the creator folds the bow tie so as to add extra quantity to the general look.

    The creator requires a stitching machine on this challenge, however you would simply use some needles and thread to attain the identical look. There’s a sample to comply with with exact directions that beginner sewers will discover straightforward to know.

    4. Slip-Over Collar Bow Tie by Canine Compilation

    Supplies: 10.5” x 10.5” piece of cotton material
    Instruments: Stitching machine, ruler/tape measure, pins, thread, needles
    Problem Stage: Straightforward

    For a straightforward slip-over-the-collar sort of bow, this design has you lined. You don’t want any elastic, rubber bands, or felt to carry it collectively. As a substitute, the bow loop wraps round your canine’s collar.

    We like this design as a result of the loop stays indifferent from the bow. You possibly can simply combine and match colours and patterns this manner.

    Just a few fundamental stitching provides are required to get began, together with about half-hour of your time. You’ll want extra material with bigger canine since this design is for smaller to medium-sized canine.

    5. Canine Bow Tie + Collar Duo

    Supplies: Males’s tie, low cost canine collar
    Instruments: Scissors, Iron, hemp tape, stitching machine, needles, thread
    Problem Stage: Reasonable

    Would you like your canine’s collar to match the bow tie? Then this design is for you. The creator of this design makes use of an previous tie and an affordable canine collar to create an lovable canine collar with an identical bow.

    The good factor about this design is that you simply don’t must buy the material. Recycle a males’s tie as a substitute or use leftover material if in case you have any from earlier tasks. Remember that the collar isn’t sturdy, so we wouldn’t suggest this design for an on a regular basis collar.

    6. Doggone Cute Cotton Bow Tie

    Supplies: 1 quarter cotton sateen
    Instruments: Pins, Scissors, ruler, seam gauge, stitching machine, sample
    Problem Stage: Reasonable

    The creator of this DIY bow tie makes use of a thicker center loop than the opposite designs (you can also make changes for those who want the skinny loop). Every step is superbly captured with photographs and video for an easy-to-make tutorial.

    There are additionally designs for collars and leashes if you would like your canine’s equipment to match. Your canine will look cute very quickly!

    For this challenge, you’ll want important stitching instruments like scissors, a ruler, a seam gauge, and a stitching machine. You could possibly additionally use some needles and thread for those who wished. You possibly can choose any cotton sateen material or one other quilt-weight cotton.

    We love this challenge. Nonetheless, the bow is small, so it could look just a little humorous in case your canine is a meathead.

    7. Recycled French Cuff Gown Shirt Canine Bow Tie by Dalmatian DIY

    Supplies: Salvaged French cuffs, salvaged shirt button plackets, complimentary coloured thread
    Instruments: Stitching needles, stitching machine, scissors, iron & ironing board (non-compulsory)
    Problem Stage: Reasonable

    Gown shirts are nice for crafting preppy tasks as a result of they give the impression of being sharp. When you’ve got any previous gown shirts, you may flip them into an lovable canine bow tie. With this DIY challenge, your canine will go from shabby to snazzy very quickly!

    You’ll want some fundamental stitching provides and a stitching machine, though you would get away with utilizing some fundamental thread and needles. To make your canine’s bow tie look further crisp, the creator recommends ironing the gown shirt.

    8. Sailor Bow Tie by See Kate Sew

    Supplies: ¼ yard quilting cotton, ¼ yard of light-weight fusible interfacing, ¼ inch braided elastic, thread
    Instruments: Stitching machine, scissors, sizzling glue gun, sizzling glue
    Problem Stage: Laborious

    This design is for these eager to make a press release with a vintage-style bow. The sailor bow is voluminous, including physique and an old school model to your canine’s wardrobe. We just like the outsized design, making it good for larger canine.

    This stitching challenge requires just a few extra provides than the opposite tasks, like a stitching machine and sizzling glue to assist maintain the whole lot collectively. You’ll want just a little extra material, too. The perfect bows are made with weighted quilting cotton.

    Divider 4


    As you may see, making a bow ties to your canine is among the easiest designs you are able to do. All you want are some fundamental stitching instruments and, usually, some weighted cotton material. Your canine will rock the brand new look, and also you’ll get pleasure from displaying off your new selfmade challenge to household and mates.

    Featured Picture Credit score: Michael G, Unsplash